50W 1000mA 0-10V CC Driver HUP50A3-1WMC-1000-6C
Technical Paramaters
Model | HUP50A3-1WMC-1000-6C | ||||
Input |
Efficiency | 86%@120Vac&Full-Load | |||
Voltage | 120~277VAC | ||||
Frequency | 47~63Hz | ||||
Power Factor | >0.9@120Vac&Full-Load | ||||
THD | <20%@120Vac&Full-Load | ||||
Current | 0.54Amax@120Vac & Full-Load, | ||||
Inrush Current | 40A peak, 1.2ms duration, <0.25A2s@120Vac, Cold Start | ||||
Leakage Current | 0.75mA max @277Vac 60Hz, UL8750 | ||||
Output |
Switch | left | Middle | right | |
Current(mA) | 1000mA | 800mA | 600mA | ||
Voltage (VDC) | 30-50Vdc | 38-50Vdc | 44-50Vdc | ||
Power(W) | 50W | 40W | 30W | ||
Current Accuracy | ±5%Io | ||||
Channel | 1 | ||||
Ripple Current | Ip-p:8%Io max | ||||
Setup Time | 0.75s max | ||||
Auxiliary Power (Vaux) | 12V(0-200mA) | ||||
Function | Dimming Type | 0/1-10V | |||
Protection | Surge Protection | L-N 2.5KV L/N-PE 2.5KV The RING WAVE is IEC61000-4-12 | |||
Short Circuit | Auto recovery. The output recovers when short is removed. | ||||
EMC | EMC | FCC Part 15 Class A | |||
Others |
Operating Temperature | -20℃~+55℃(-4°F~131°F) ;10%RH~100%RH | |||
Storage Temperature | -40℃~+85℃(-40°F~185°F); 5%RH~100%RH | ||||
MTBF | ≥320,000 hours, 75℃ (167°F)case temperature (MIL-HDBK-217F) | ||||
Lifetime | ≥50,000 hours, 90℃(194°F) case temperature, refer to life vs. Tc curve | ||||
Case Temperature | 90℃(194°F) | ||||
Dimensions | 6x1.8x1.1 Inch (152.4*45.72*27.94mm) (L*W*H) | ||||
Net Weight | 380g (0.83 lb) | ||||
Packing | N/A |
Notes: Unless specified, all the test results are measured in 25℃ room temperature.
* marked items are optional contact sales people to get the functions
Application
Dimension(mm)
Metal case
All material to be ROHs compliant to Directive 2002/95/EC
Wires to be Stranded with UL approval
Input: Black & White: 260mm , 18AWG
Output: Red & Blue: 300mm , 20AWG
Dimming: Purple & Pink:260mm , 18AWG
Output:Yellow & Borwn:260mm , 20AWG(12Vaux)
Dimming
Parameter |
Min |
Typ. |
Max. |
Vdim Sourcing Current |
90uA |
100uA |
110uA |
0-10V Dimming Range |
0% (Vdim≤0.3V) |
Linear |
100% (Vdim=8.7V) |
Dimming Curve
Lifetime vs. Case Temperature
Nameplate
Cautions
1.This product should be installed by qualified personnel.
2.This product is non waterproof, need to avoid sun and rain.In case of outdoor use, please ensure it is mounted in a water proof enclosure.
3.Good heat dissipation conditions extend product life. Please install the product in a well-ventilated environment.
4.Please make sure LED power supply output voltage, current is used to meet the product requirements.
5.Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector.
6.In case of malfunction, do not repair it yourself.
※ The contents of this manual are updated without prior notice. If the function of the product you are using is inconsistent with the instructions, the function of the product shall prevail.Please contact us if you have any questions .